Your production floor takes a beating. Forklifts, chemical spills, static-sensitive assembly lines, airborne dust in clean rooms. Oshawa Concrete sizes the slab and selects the coating system to match what your process demands. Heavy-duty, chemical-resistant, anti-static, or dust-proof. Work fits around your shifts. Free written estimate.
A factory floor is not just a surface. It absorbs impact from equipment, resists chemical attack, controls static discharge, and contains dust. Pick the wrong system and the slab spalls under dropped loads, the coating fails under solvents, or static ruins a batch of circuit boards.
For cleaner environments, dust-proof concrete sealing closes the slab pores so it stops shedding particles. Each system is engineered to the room, not the other way around. That is how industrial concrete gets built.
Recent work
Installation sequence
How Manufacturing Concrete Floors Get Built in Oshawa
Assess the process
We walk the floor, document equipment loads, identify chemical exposure, static or dust concerns, and confirm any compliance or cleanliness standards the room must meet.
Prepare the substrate
Existing concrete is ground or shot-blasted, cracks are repaired, and the slab is leveled where needed so the coating system bonds to sound, clean concrete.
Install the system
We apply the matched system per manufacturer spec: heavy-duty pour, chemical-resistant topcoat, ESD grounding layer, or dust-proof sealer, primer through finish coat.
Cure and hand off
Each zone is cured to spec, marked with the date it carries traffic, and handed off with the maintenance routine that keeps the floor certified and performing.
Four floor systems
Choosing Between Heavy-Duty, Chemical, ESD and Dust-Proof
Not all manufacturing floors face the same demands. ESD flooring is grounded to dissipate static for electronics assembly and pharmaceutical packaging, where a discharge can destroy a product. Chemical-resistant systems use novolac epoxy or polyurethane where the floor sees acids, alkalis, or aggressive solvents daily.
A heavy-duty slab is the foundation for high-impact environments, reinforced to take dropped steel and continuous forklift loading. And dust-proof sealing is the economical choice for clean rooms and finished-goods storage where airborne particles must be minimized but chemical or impact loads are light.
We size the system to the room. Call us with your process, and we will recommend the right concrete floor for what it has to do.
Load ratings, chemical compatibility, static control and dust containment for industrial concrete in Oshawa.
By matching it to the process. We confirm loads, chemicals, static or dust requirements and the cleanliness or compliance standard, then choose between heavy-duty, chemical-resistant, ESD or dust-proof systems.
Yes. A heavy-duty slab with a chemical-resistant coating handles both, the slab takes the impact and load, the coating sheds the spills. We engineer the combination to your specific chemistry.
ESD flooring is a grounded floor system that dissipates static electricity. Electronics, pharmaceutical and battery operations need it because a static discharge from a normal floor can damage products or trigger an event.
Usually. We phase the work cell by cell or shift the schedule to off-hours, so production keeps running while one area cures. The phasing plan is built with you before the first prep.
It depends on the room. Dust-proof sealing closes the slab against airborne dust at a fraction of a full coating's cost. Where chemicals, impact or static are also factors, the room needs a full system.
Client feedback
What Oshawa Plant Managers Say About Their Concrete Floors
Describe the process, equipment loads, chemical exposure, static or dust concerns, and we will engineer a concrete floor system, prepare a detailed scope, and send a written, itemized estimate within one business day.
