Oshawa Concrete pours warehouse slabs, manufacturing plant floors, food-grade systems and equipment pads engineered to load and flatness tolerance. We supply concrete pumping and ready-mix, work from your drawings, and deliver a free written estimate with a firm schedule that fits your operation.
Warehouse slabs, manufacturing floors, food-grade systems, equipment pads and concrete supply. One crew, one spec, one schedule. Select a service to learn more.
A working warehouse floor takes constant punishment: loaded forklifts, reach trucks, racking posts, pallet drops. The slab that survives is engineered from the ground up. Thickness, reinforcement, base prep, and a laser-screeded surface within flatness tolerance all matter. Joints are detailed to the rack layout and saw-cut on schedule, then filled with a semi-rigid material so edges don't spall under wheel traffic.
That same engineering principle applies across the industrial spectrum. Manufacturing plant floors handle equipment loads and process chemicals, food processing facilities require washdown-ready systems and sanitation compliance, and cold storage slabs must resist thermal cycling without cracking.
For large or difficult placements, our concrete pumping service keeps the pour continuous, which is essential for achieving the flatness and durability that industrial floors demand. We also coordinate ready-mix supply so the concrete arrives on schedule and the slab cures properly.
You send structural drawings, floor spec, load ratings, flatness tolerance and joint layout. We visit the site, measure the area, and confirm the subgrade and base conditions.
Prepare base and set reinforcement
We compact the subgrade to spec, place and tie reinforcement, set embeds and control points, and confirm the mix design and joint plan before ordering concrete.
Place and finish to tolerance
The crew places concrete with laser screeds, finishes to the specified flatness, and saw-cuts joints on layout. Our pumping keeps large pours continuous and uniform.
Cure, fill joints and sign off
We cure the slab, fill and detail joints, take flatness and load readings where required, and hand over the floor ready for racking, equipment and traffic.
Common questions
Industrial Concrete Questions Answered
Load ratings, flatness tolerance, joint detailing, compliance and scheduling on an industrial concrete project in Oshawa.
Yes. We build warehouse and distribution slabs and plant floors to the load rating, slab thickness and FF/FL flatness numbers in the spec, using laser screeds and a controlled finishing sequence, and we provide the readings.
Yes. Food processing plants get washdown-ready urethane and epoxy systems built for sanitation, and manufacturing floors can be specified chemical-resistant for the process.
Usually. We phase industrial pours bay by bay, work off-shift where it matters, and stage the work so production keeps moving while one area cures and gains strength.
Yes. We run concrete pumping for hard-to-reach and high-volume placements and coordinate ready-mix supply so large pours stay continuous.
Joints are laid out to the spec and the rack layout, saw-cut on time, then filled with a semi-rigid filler so edges hold up under hard-wheel forklift traffic.
New warehouse slab poured to our FF/FL spec and signed off with the readings. Racking went in straight and the forklifts run smooth across every joint.
R. T.
Distribution centre manager
★★★★★
Replaced a failing process-area floor with a food-grade urethane system. It handles the washdowns, drains properly, and passed our sanitation audit.
K. W.
Food plant maintenance
★★★★★
Poured heavy equipment pads and a wash bay on a working yard. They phased it so we never lost the shop, and the slabs take the loaders fine.
D. H.
Fabrication shop owner
★★★★★
Cold storage slab done right, thermal breaks, the correct mix, flat and tight joints. A year of cycling later there is no spalling or lift.
M. B.
Facilities engineer
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Oshawa.
Warehouse slab, manufacturing floor, food-grade system, equipment pad or a pumping and supply package. Send us the spec and drawings and we'll schedule a site review with a written quote and a schedule built around your operation.
