A Oshawa garage floor takes hot tires, road salt, melt water and dropped tools all winter. An epoxy, metallic or polyaspartic coating turns that bare slab into a sealed, easy-clean surface that resists it all. We prep the concrete properly first, because the prep is what makes a coating last, and every job starts with a free written estimate.
Most failed garage floors are not a product problem, they are a prep problem. A coating rolled over a sealed, dusty or unprofiled slab peels and flakes within a season, usually right where the tires sit.
We grind or shot-blast every garage floor to open the concrete, repair cracks and pits, and check for moisture before anything goes down. Only then does the coating system go on, primer through topcoat, to the manufacturer spec.
From there the system suits the use. Epoxy is the proven workhorse, polyaspartic cures fast and resists UV, and metallic epoxy adds a showroom finish. The same coating know-how carries into our interior epoxy floors.
Recent work
How it works
How We Coat a Garage Floor in Oshawa
Test and assess the slab
We check the slab for moisture, old sealers, cracks and pitting, and confirm which coating system suits how the garage is used.
Grind and repair the concrete
We mechanically grind or shot-blast the concrete to a clean profile, then fill cracks and pits so the coating bonds to sound concrete.
Coat the full system
We apply the full system, primer, body coat with flake or metallic if chosen, and topcoat, to the manufacturer spec for coverage and cure.
Cure and return to service
The coating cures, we walk the floor with you, and you get the timeline for foot traffic, vehicles and the care steps to keep it.
Coating options
Garage Coatings Matched to How You Use It
The right system depends on the garage. Epoxy is the highest-volume choice, a tough, sealed, flake-finished floor at a sensible price. Polyaspartic costs more but cures in about a day and holds its colour under UV.
For a showroom look, metallic epoxy moves pigment for a marbled finish, and a polished garage floor skips coatings entirely for a hard, low-sheen surface. When a coating has failed, garage floor repair strips and rebuilds it right.
Coating systems, prep, cost and durability for a Oshawa garage floor.
Coatings peel when they are applied over an unprepared slab. We mechanically grind or shot-blast every floor to a clean profile and check for moisture first, so the coating bonds to sound concrete instead of dust or old sealer.
Epoxy is the proven, cost-effective workhorse. Polyaspartic costs more but cures in about a day and holds its colour under UV. We match the system to how the garage is used and your timeline.
Yes, when it is the right system on a properly prepped slab. Epoxy, metallic and polyaspartic coatings are built to resist de-icing salt, moisture and hot-tire pickup, which is exactly what a Oshawa garage throws at a floor.
Coatings generally run $4 to $9 per square foot depending on the system, the slab condition and how much repair the concrete needs first. We confirm it with a written, itemised quote after seeing the floor.
Yes. Garage floor repair strips the failed coating, re-profiles the slab, repairs the concrete and rebuilds the system properly so the new finish actually bonds and lasts.
Homeowner reviews
What Oshawa Homeowners Say About Their Garage Floors
Tell us how you use the garage and we will recommend the right coating system, prep the slab properly, and put the whole job in a written, itemised quote.
