When a warehouse floor, parking deck or foundation needs to hold up for decades, BASF Master Builders chemistry is the engineered choice. We pour and coat with MasterSeal, MasterTop and MasterFlow to the exact protocol BASF publishes, keeping your warranty intact and your structure performing.
A warehouse floor sees fork-truck traffic, hot-tire pickup and washdown. A parking deck moves with freeze-thaw and carries constant vehicle load. A foundation below grade faces water pressure and chemical exposure. Generic epoxy or waterproofing will not hold up. MasterTop floor systems are formulated for the specific wear and chemistry each environment throws at concrete.
MasterSeal waterproofing is engineered for the movement and moisture cycling that parking decks and below-grade slabs experience. MasterFlow precision grouts eliminate shrinkage gaps under base plates and machinery, keeping load transfer true. Each product is part of a system, not a standalone coating.
We install the full MBS system in the published sequence, with verified lift thicknesses and cure times. Your project file documents everything, so the BASF warranty is defensible and your concrete performs as specified.
On the job
Installation sequence
How BASF MBS Systems Get Installed in Oshawa
Assess the concrete and environment
We evaluate the substrate condition, the loads and chemical exposure the slab will face, and confirm which MBS product line (MasterSeal, MasterTop or MasterFlow) the project requires.
Prepare and prime the surface
The concrete is mechanically prepped, any cracks or voids are repaired, and the MBS primer designed for that system is applied to ensure adhesion and performance.
Apply the MBS system to spec
We install the full system, body and topcoat or grout, in the published lift thicknesses and cure schedule, with on-site verification of mix ratios and application thickness.
Document and hand over
Each layer cures to MBS schedule, performance testing is done where required, and a complete project file with data sheets and as-built notes is provided for your warranty.
Three product lines, one protocol
How MasterSeal, MasterTop and MasterFlow Work Together
MasterSeal is the waterproofing line for parking decks, plaza decks and below-grade structures. It flexes with slab movement, resists freeze-thaw cycling and keeps water out. Parking lot and deck projects across Oshawa rely on MasterSeal because it is engineered for the exact conditions those structures see.
MasterTop handles the wear surface on industrial and commercial floors. Polyurethane, MMA and epoxy formulations are each engineered for specific wear patterns. Fork-truck traffic, hot-tire pickup, chemical washdown, impact from heavy equipment. Manufacturing facilities and warehouses specify MasterTop because it holds up where generic coatings fail.
MasterFlow grouts are precision grouts for base plates, machinery and structural connections. They set without shrinkage, transfer load without gaps, and hold vibration in place. Together, the three lines form a complete system for ICI concrete.
MasterSeal vs MasterTop, MBS install protocol, ICI scale and warranty in Oshawa.
BASF Master Builders Solutions (MBS) is BASF's industrial and commercial chemistry line, covering waterproofing (MasterSeal), floor systems (MasterTop) and precision grouts (MasterFlow) for ICI projects.
When the wear is predictable to be hard, hot-tire pickup, fork-truck traffic, MMA-grade impact, washdown chemistry. MasterTop systems are engineered for those environments and warranty their performance there.
MasterFlow grouts are precision grouts placed under base plates, equipment and structural connections to transfer load without shrinkage gaps. Where standard mortar would shrink and lose contact, MasterFlow holds the connection true.
It is among the most-specified for parking and plaza decks because the chemistry is engineered for the deck movement, traffic and freeze-thaw cycle those structures see. MasterSeal systems have the track record to back it on ICI specs.
Yes. We install the full MBS system, primer, body and topcoat, in the published protocol and verified lift thicknesses, with the project file documented so the BASF warranty stays intact.
Client reviews
What Oshawa Clients Say About Their BASF Master Builders Installs
MasterTop in our production area. Polyurethane system that takes the hot-tire and fork-truck punishment without softening. Replaced the floor we were patching every year.
V. M.
Industrial facility manager
★★★★★
MasterSeal on the parking deck. Sealed, flexible, and through one freeze-thaw season already without a single fresh leak below.
G. B.
Commercial property lead
★★★★★
MasterFlow under our new equipment base plates. Set true, no shrinkage gaps, vibration is controlled. Done by the spec, not the rule of thumb.
N. E.
Plant maintenance
★★★★★
They installed BASF MBS the way the spec called for, with the project file at the end. Made the building owner's warranty paperwork actually defensible.
F. K.
ICI project manager
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Oshawa.
Send us your scope, your spec or your questions about MasterSeal waterproofing, MasterTop floor coatings or MasterFlow grouts. We will build a quote to the MBS protocol and deliver it in writing within one business day.
